How do you program a key for a Ford Explorer?
Insert the key you want to program into the ignition cylinder within 20 seconds of removing the last key. Turn the key to the “On” position for at least three (but no longer than 10) seconds. Turn the key to the “Off” position and remove it. Re-insert the key and try to crank the engine.
How do you reset the anti theft on a 2004 Ford Explorer?
First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.
How do you program a key for a 2005 Ford Explorer?
INSERT key into Ignition and TURN from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm Programming Mode. Within 20 seconds press any button on first keyless remote fob. Door locks will cycle to confirm programming.
Can Ford keys be reprogrammed?
There’re actually a few different places you can go to get a replacement key for your Ford if you need to. You can go to a locksmith where they can create you a brand new key, provided you show the correct credentials and papers to them. At a locksmith, they can even help you reprogram your key.
How do I bypass Ford anti theft system?
Key
- Insert the key into the driver’s side door lock.
- Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds.
- Do this again, but turn the key in the opposite direction.
- Remove the key from the door, get into your Ford, and start the engine. The system should be reset.
How do I reprogram my ignition key?
Programming a Single Key
- Insert the key into the ignition, and turn it to the on position.
- Leave the key in this position for 10 minutes and 30 seconds, and then turn it off.
- Turn the key back on, and wait for additional 10 minutes and 30 seconds before turning it off again.
- Repeat the process for a third time.
Does a 2004 Ford Explorer have a chip in the key?
If your Ford Explorer was made in the years 1998, 1999, 2000, 2001, 2002 or 2003, then most likely your Ford Explorer will require a transponder chip key. If your Ford Explorer was made in the years between 2011 and 2013, you can have a key fob made to your SUV.