How do I sidechain compress in Ableton?

How do I sidechain compress in Ableton?

How to Use Sidechain Compression in Ableton

1. Load Ableton’s Glue Compressor onto the Track You Want to Compress.
2. Click the Sidechain Toggle Button.
3. Enable the Sidechain Input.
4. Select a Sidechain Input Signal.
5. Enable the Sidechain EQ.
6. Filter the Sidechain Input Signal.
7. Set the Attack, Release, Ratio, and Threshold.

What instruments do you sidechain?

That can mean bass guitar, kick drum, or bass synthesizer. The fact is that any instrument and any frequency can be boosted by sidechain compression, but the effect has become almost synonymous with bass frequencies in club music.

How do I set up sidechain compression?

Here’s how to set up sidechain compression.

1. Insert a compressor onto the bass track (select a compressor with a sidechain or key input).
2. Select the kick drum audio as the sidechain input.
3. Adjust the threshold and ratio controls so that the bass is compressed by the desired amount whenever the kick drum hits.

How does compression work in Ableton?

One of the most used inserts that come with Ableton Live is the Compressor, which can be defined as a device that affects the dynamic range of a signal by bringing down the level of the loudest parts, making the loud and quiet parts closer together in volume, ultimately yielding volume differences that are less obvious …

Who popularized sidechain compression?

Douglas Shearer
It may shock you to learn that the initial applications for sidechain compression in the 1930s were not directed at making French filter house. Rather, it started with a film audio engineer named Douglas Shearer, who needed a way to tame the sibilance (the hard “s” sounds) of dialogue recordings.

What is a sidechain Ableton?

Sidechaining is a technique in music production that uses an audio signal from one track to control an audio effect on another track. Sidechaining has a variety of uses, from practical audio mixing to creative sound design.

How does Ableton compression work?

Compression reduces the levels of peaks, opening up more headroom and allowing the overall signal level to be turned up. This gives the signal a higher average level, resulting in a sound that is subjectively louder and ”punchier” than an uncompressed signal.

Should you compress kick drum?

This is especially important with drums, which can have extremely sharp peaks on hits. Proper use of compression will let you clamp down on the tracks without crushing them, and also let you shape the snap, crack, and sustain you want in your drums.

Are Ableton compressors good?

Ableton Live’s compressor does the job very well. I have tried other external compressor plugins, and none of them quite match the simplicity of Ableton Live’s stock compressor. It has all the features you need to create a balanced, punchy sound.

How to use Ableton’s glue compressor in sidechain mode?

However, Ableton’s Glue Compressor can perform a similar type of processing when placed into sidechain mode. To achieve this effect, start with a ratio of 4:1 or 10:1, an attack time of 0.1 ms, and a release time of at least 0.4 s. The more gain reduction you apply by lowering the threshold level, the deeper the pumping effect will be.

How to sidechain in Ableton Live 10?

Sidechaining in Ableton Live 10 is done very quickly through Live’s built-in compressor. In your compressor’s sidechain settings, you have complete control over threshold, ratio, attack, release, and more, which all works to shape your particular sound. 1. Add The Compressor.

How to compress an audio track in Ableton?

1. Load Ableton’s Glue Compressor onto the Track You Want to Compress Drag and drop Ableton’s Glue Compressor, found under the Audio Effects tab, onto the track you want to apply compression too. This is the track that you’ll be ducking out of the way for another element in your mix.

How do I use sidechain on my compressor?

Enable “sidechain” on the Compressor, then select the track that you want to use as a source signal. Note that there’s a second selection box for choosing pre-/post-FX or post-mixer – useful if, say, you’ve slapped a heavy distortion on the kick but you want the more transient original signal to be the sidechain source.