What size are my drawer pulls?

What size are my drawer pulls?

Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.

How do you match drawer pulls?

For placing multiple pulls on the same drawer, divide the face of the drawer into three equal parts….Drawers:

1. Use two knobs or two smaller pulls.
2. Use longer pulls 8-15”
3. Use an appliance pull.

What does center to center mean on cabinet pulls?

The Center-to-Center of any drawer pull is the distance between the center of one screw hole to the center of the other. Measuring the center-to-center of the drawer pull is key in determining what new hardware will fit and whether you’ll need to drill new mounting holes or fit into existing ones.

What size pulls for 24 inch drawers?

Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.

How do you find a drawer pull?

To tell age and time period of drawer pulls, look at appearance and construction of handles. Styles include Chippendale Drawer Pulls, Hepplewhite Handles, Victorian Pulls, Arts and Crafts Mission Pulls and the classic Bail Pull, to name just a few. Choose handles that are authentically reproduced.

How do you measure center drawer pulls center?

To find the center-to-center measurement, use a screwdriver to remove your current pulls, then take a ruler or measuring tape and measure from the center of one screw hole to the center of the other screw hole.

What size pulls for 36 drawer?

Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.