How big of a condensate pump do I need?
Condensate pumps are typically sized at three times (3x) normal condensing or evaporation rate. These guidelines are based upon design and operating experience. However, upon proper application, units can be sized at two times (2x) the condensing or evaporation rate.
How long do AC condensate pumps last?
systems before the pump basin runs over. 2) It is never too soon after about 10 or 15 years to replace them but most will go 20 years +. It should last 5 years anyway.
How do I know which condensate pump to buy?
Select a pump with a maximum lift rating that is suitable for your application. Check your equipment service manual to determine the condensate output and choose a pump with sufficient capacity. As a general rule, the output flow of the pump should be at least double the input rate from the appliance.
What is the purpose of a condensate pump?
Condensate pumps are a type of centrifugal pump that is used to collect and disperse the hot water and liquid produced by condensation from heating systems, such as gas and oil condensing boilers, from the production of refrigerated air, such as air conditioning and refrigeration systems, air dehumidifiers and …
Which Little Giant condensate pump is best?
Best HVAC Condensate Pumps
- TOP 1. Little Giant 554425 VCMA-20ULS 80 GPH 1/30 HP Automatic Condensate Pump. CLICK FOR PRICE Read Review.
- TOP 2. Little Giant 554415 VCMA-15ULST 65 GPH 1/50 HP Automatic Condensate Pump. CLICK FOR PRICE Read Review.
- TOP 3. Little Giant 554405 65 GPH VCMA Series Automatic Condensate Removal Pump.
How much does an AC water pump cost?
Condensate Pump – The cost to replace a condensate pump is between $100 and $165, with the part usually costing about $45. As your AC unit runs, it produces condensation, which the condensate pump removes.
What happens when a condensate pump fails?
In newer homes, excess water from condensation goes right into a nearby floor drain. So furnace installers mount a condensate pump right on the furnace and route the drain line to a far-off sink or floor drain. If that condenser pump fails, the water overflows the pump and spills onto the floor.
Where is condensate pump located?
The condensate pump simply sits on the floor in this installation. It receives into its reservoir condensate from a drain attached to the air handler and pumps the condensate to a suitable drainage location.
Do you really need a condensate pump?
If the condensing boiler is situated below the drainage line, then you will need a condensate pump to help remove the wastewater from your home. For example, if your boiler is installed in the cellar or basement, then gravity will not be able to take the wastewater to the drainage system at ground level.
Where is the condensate pump located?
How noisy are condensate pumps?
Condensate pumps are often very loud due to high fluid velocity and hydraulic action. Depending on the size, location and noise level of the pump, steps taken to reduce noise may include altering the insulation between building floors, reducing flow velocity or providing rubber buffers.